The Flamrad Gas Fired Infrared radiant Heater 700 series are ideal for use in many commercial and industrial applications where full or localised heating is required.

Features

• High radiant efficiency - high emissivity plaques with re-radiation gauze.
• High temperature aluminium reflector - increased emissivity, lightweight strong and durable.
• Vitreous steel burner - does not rust or corrode - gives longer life than aluminised steel or stainless iron.
• Lightweight - makes it easy to install and maintain - can be suspended from pipe work.
• Infrared heat - gives instant directional heat where you want it and does not warm the air, so there is no air movement and circulation of dust, all of which means lower running costs.
• Mounted at high level either overhead or on a wall, releasing expensive and often much needed floor space.
• Safety first - all Flamrad heaters have been approved to the stringent safety requirements of the European gas appliance directive and have been granted the CE mark.
  

Flamrad Automatic Radiant Heaters

These heaters are fully automatic in operation having spark ignition and flame monitoring. In the event of flame failure, lockout of the appliance will ensure complete safety; the unit can be reset by interrupting the mains supply. The heaters lend themselves to control by time clock, thermostats or energy management systems.

Notes

When ordering please specify model no. - i.e. A = Auto, M = Manual, N = Natural Gas, P = Propane e.g. 707AN, 7kw heater, automatic control, operating on natural gas.
Maximum inlet pressure = 60mb all automatic models.
Gas pressure required at heater. Natural gas = 20 mb. Propane = 37 mb.
Electrical input = 230V AC 50 Hz 13 or 15 amp supply. Fused 3 amp.